 |
Heater,heaters Indoor Portable,Air Heater
clear ventilation
clearer vision,no longer worry about the summer ventilation function
warm life
when you are not getting into the car in winter,the temperature inside the car is low and the service life is ten years.
no frosting,protect the engine
do not hang frost on the outside of the cold,go directly on the car and drive away to avoid low temperature cold pneumatics to bring to the engine
wear
time saving
save more time,compact structure and easier installation
fuel saving
constant temperature control system,more fuel-efficient and environmentally friendly products,low emissions,low fuel consumption
| Product volume: | |
|---|---|
| unit weight: | |
| Quantity: | |
-
HMC2019071003
1, using the operation method
a. Press the heater water pump switch to operate the pump.
This switch can realize the use of the engine residual heat for the interior heating
and the windshield defrosting.
b. Press the heater switch, the heater starts to work, and the ignition is automatic.
c. After the heater is on fire, the controller automatically cuts off the glow plug and
the heater works normally.
d. Heater water inlet temperature sensor automatically controls the coolant temperature
in the circulation system. Fire extinguishing when the inlet temperature reaches 80 °C;
re-ignition at 65 °C, the pump continues to work.
e, shutdown: first turn off the heater switch, then turn off the water pump switch, can not be closed first
Close the heater and turn off the heater.
2, switch panel introduction
Take a vehicle fuel heater switch panel as an example, its switch functions are as follows:
a, heater water pump switch: used to open or close the water pump in the heating system
b. Heater switch: used to turn the heater on or off
c. Radiator switch: used to open or close the fan on the radiator
d, defroster switch: used to open or close the fan on the defroster
1, using the operation method
a. Press the heater water pump switch to operate the pump.
This switch can realize the use of the engine residual heat for the interior heating
and the windshield defrosting.
b. Press the heater switch, the heater starts to work, and the ignition is automatic.
c. After the heater is on fire, the controller automatically cuts off the glow plug and
the heater works normally.
d. Heater water inlet temperature sensor automatically controls the coolant temperature
in the circulation system. Fire extinguishing when the inlet temperature reaches 80 °C;
re-ignition at 65 °C, the pump continues to work.
e, shutdown: first turn off the heater switch, then turn off the water pump switch, can not be closed first
Close the heater and turn off the heater.
2, switch panel introduction
Take a vehicle fuel heater switch panel as an example, its switch functions are as follows:
a, heater water pump switch: used to open or close the water pump in the heating system
b. Heater switch: used to turn the heater on or off
c. Radiator switch: used to open or close the fan on the radiator
d, defroster switch: used to open or close the fan on the defroster
